LG MultiSITE CRC2 Series Installation Manual page 39

It is strongly recommended to attach the sensor to the wall by using the two screws.
The adhesive in double-sided tape may not be as long-lasting or as strong to sup-
port the sensor throughout its lifetime. Figure 42 shows where to attach the tape.
3. Ensure click sound is heard to verify sensor is secured to bracket and ensure
side tab of bracket is aligned with opening on side of sensor (Figure 43).
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
ACCESSORIES INSTALLATION
Figure 42: Double-Sided Tape Installation
Figure 43: Secure Sensor to Bracket
ZigBee
Double-sided
adhesive tape zone
39