Water Leak Sensor Zvrczwls1 - LG MultiSITE CRC2 Series Installation Manual

Water Leak Sensor ZVRCZWLS1

Follow this procedure to install the optional water leak sensor.
Consider the following location constraints before installing a ceiling/wall sensor:
• Do not install a on metal surface.
• Do not install in areas with a direct heat source.
• Do not install near any air discharge grill.
• Do not install in areas exposed to direct sunlight.
• Ensure mounting surface is flat and clean.
• Install in a dry location away from water, moisture, or rain.
Sensor Placement
Figure 39 shows suggested placement guidelines to optimize sensor operation.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
ACCESSORIES INSTALLATION
Figure 39: Water Leak Sensor Placement
35