Important Safety Instructions - LG AC Ez Touch User Manual

IMPORTANT SAFETY INSTRUCTIONS

4
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
• The installation work requires a specialized technology, so it shall be installed through the serv-
ice center or an installation specialized store acknowledged by LG.
• If the installation work is done without an installation license, the installer will be responsible for all
problems related to the installation, and in such case, LG will not provide the free of charge A/S.
• The following safety related cautions are to prevent the unexpected risk or damage in advance.
! WARNING
If the instructions are not followed, it may cause death or severe injury of the user.
! CAUTION
If the instructions are not followed, it may cause injury or property damage of the user.
These are the symbols to alert the matters and operations that may have risks. Please care-
!
fully read them and follow the instructions to avoid the risk.
This is a symbol that indicates the action to avoid for reducing risk.
!
NOTE
System air conditioner is not to be moved. If it has to be moved inevitably, make sure to contact
the system air conditioner store with LG Electronics system air conditioner installation license.
! WARNING
Installation
• When you re-install this product, please contact your Supplier or Installation Company to carry
out the work. If someone inexperienced installs the product, it may result in fire, electric
shock, explosion, injury, or failure of the product.
• Ensure there is no damage the power cable. It may cause fire or electric shock.
• When you perform any electrical work, please contact the Supplier or Installation Company. If
an inexperienced person performs the disassembly or repair, it may cause fire or electric
shock.
• Install the product that can avoid rain water. If water enters into the product, it may cause
product failure.
• Do not install the product at a place with a lot of moisture. If moisture enters the product, it
may cause product failure.
• Make sure to contact the Supplier or Installation Company for the product installation. If
someone inexperienced installs the product, it may result in fire, electric shock, explosion, in-
jury, or failure of the product.
• Please ensure an electrical engineer perform the electric work based on the installation man-
ual and the designated circuit diagram. If incorrect wiring is used, or inexperienced engineer
performs the electric work, it may cause fire or electric shock.
• Do not place the product near an electric fire. It may cause fire.
• Avoid installing this controller in an area with sensitive electronic equipment. It may cause
electrical interference with sensitive electronics.