Table of Contents
Advertisement
ACCESSORIES INSTALLATION
Ceiling/Wall Motion, Temperature and Humidity
Sensor ZVRCZMTH1
Follow this procedure to install the optional
ceiling/wall sensor.
Consider the following location constraints before installing a ceiling/wall sensor:
•
Do not install a on metal surface.
•
Do not install in areas with a direct heat source.
•
Do not install near any air discharge grill.
•
Do not install in areas exposed to direct sunlight.
• Ensure mounting surface is flat and clean.
• Install in a dry location away from water, moisture, or rain.
Sensor Placement
Figure 37 shows suggested placement guidelines to optimize sensor operation.
4 ft
Due to our policy of continuous product innovation, some specifications may change without notification.
32
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Figure 37: Ceiling/Wall Sensor Placement
R 16.4 ft
8.2 ft
13.1 ft
Hide quick links:
Advertisement
Table of Contents
