Advertisement
Quick Links
K&A Manufacturing
6703 Zinser Street
Schofield, WI 54476
Phone: 800.298.4351
Fax: 866.882.9475
www.raproducts.com
7/24/14
NewHeights Series 4 LT
Eficiente 2-Leg Workstation
Read all the instructions before beginning.
Instruction # 53026
Hardware Pack # 53023
Page 1 OF 6
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for RightAngle NewHeights 4 LT Series
Summary of Contents for RightAngle NewHeights 4 LT Series
- Page 1 K&A Manufacturing 6703 Zinser Street Schofield, WI 54476 Phone: 800.298.4351 Fax: 866.882.9475 www.raproducts.com 7/24/14 NewHeights Series 4 LT Eficiente 2-Leg Workstation Read all the instructions before beginning. Instruction # 53026 Hardware Pack # 53023 Page 1 OF 6...
- Page 2 We will replace any defective part after inspection by an authorized agent. Costs incurred due to product replacement such as installation labor or transportation are not covered under this warranty. When corresponding with RightAngle™ products, record and provide the model and serial numbers located on the control box.
- Page 3 Step 1: Lay the worksurface 1 on a protected surface with the pilot holes facing up. There are metal inserts installed in the worksurface. K&A Manufacturing These will not be used for this workstation. 6703 Zinser Street Schofield, WI 54476 Phone: 800.298.4351 Place the left leg assembly 2 on the work- Fax: 866.882.9475...
- Page 4 Step 4: Place the right leg assembly 7 on the worksurface 1 . Insert the end of the hex rod 6 into the hex drive on the right leg K&A Manufacturing assembly. You may need to turn the hex 6703 Zinser Street Schofield, WI 54476 rod clockwise slightly with an adjustable Phone: 800.298.4351 Fax: 866.882.9475...
- Page 5 Step 7: Attach the leg assemblies 2 and 7 to the worksurface 1 using (16) wood screws 12 . Do not over-tighten the screws. Use a low torque setting on the power driver. K&A Manufacturing 6703 Zinser Street Schofield, WI 54476 Phone: 800.298.4351 Step 8: Align the holes in the u-channel 13 with the Fax: 866.882.9475...
- Page 6 If you continue having problems with the table operation, contact RightAngle™ service at 800-298-4651 or orders@raproduts.com. Instruction # 53026...
Need help?
Do you have a question about the NewHeights 4 LT Series and is the answer not in the manual?
Questions and answers