Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Error Messages Displayed on the Control Panel (continued)
Error Message
What It Means
Stacker Error
There is a problem
with the stacker
rollers.
Use New Setting ?
This message
Yes: Enter No:!
appears when you
have changed a
setting but have
not confi rmed it by
pressing Enter.
SV40214 Rev. A
DF500 Folder Operator Guide
Operator Action
• Press Enter and the problem may
clear itself automatically.
• If this does not help, turn power off
and remove the fold plate assembly
as described on page 33. This
gives access to the stacker drive
mechanisms on the underside of
the stacker table. Locate the stacker
motor and turn the small drive gear
on the motor shaft. This will move the
stacker rollers. Turn the gear in the
direction that will move the stacker
rollers away from the extreme end
of their travel. Keep turning until the
stacker rollers have moved about 3/4"
(20mm) away from the end of their
guide slots in the stacker table. Refi t
the fold plate assembly as described
on page 33 and turn power back
on. The stacker rollers will move to
their proper position and the display
will return to the running mode. If
the rollers return to their extreme
position and the "STACKER ERROR"
message appears again, try the above
procedure once or twice more. If the
fault persists, call Pitney Bowes for
assistance.
Press Enter to activate your setting or
! to stay with your previous setting.
39
Advertisement
Table of Contents
