Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Clearing a Jam (continued)
4. If the paper is bunched up inside, making it hard to turn the
knob or the fold roller directly,
remove the two de flec tor bars.
Using the screw as a handle,
push the bar towards the con-
trol panel, then lift it out. Any
paper inside should now be vis-
ible and is easily removed.
5. Refit the deflector bars by inserting the round end with the
spring into its hole in the operator side frame. Guide the
other end of the bar into the square hole on the opposite
side frame.
6. When you have finished using the manual turnover knob,
press it back in so that it latches into position.
7. While the top cover is open, the display will show:
Close the cover and the display will return to normal running
mode, showing whatever fold job, etc.. had been there before
the jam.
8. If the display still shows "JAM IN FOLDER", press Enter and
the display should return to running mode.
9. If the error message does not go away, this means that there
is paper stuck in the fold plate. Turn off the main power
switch and refer to the following section "Removing the fold
plates".
SV40214 Rev. A
DF500 Folder Operator Guide
TOP–COVER OPEN
33
Advertisement
Table of Contents
