Table of Contents
Advertisement
All manuals and user guides at all-guides.com
DF500 Folder Operator Guide
Retrieving A Job From Memory
1. To retrieve a job from memory and set it up, press the Select
Job key repeatedly until the job you want is displayed:
2. If you press Enter, the job shown will be set up and the dis-
play will show in succession:
JOB: 2
SETTING
3. If you press ! key, the display will return to the normal run-
ning mode without a job being selected.
Identifying A Job In Memory
1. Use the Select Job key to step through the available jobs
stored in memory. The appropriate indicators for paper size
and fold type will light up for each job. This way you can tell
what kind of job is stored under each job number.
2. If you want to know exactly what dimensions are stored for
each fold plate, press the Fold 1 or Fold 2 keys. The display
will briefly show the fold plate dimension set for the job:
3. If the job has a single fold, pressing Fold 2 will not display
a di men sion as fold plate 2 is closed for single fold applica-
tions.
26
SELECT JOB:
2?
YES: Enter
No:
JOB: 2
SELECT JOB:
2?
YES: Enter
No:
SELECT JOB:
2?
FOLD 1 = Ø9Ø.Ø
!
READY
ØØØØØØ
!
SV40214 Rev. A
Advertisement
Table of Contents
