Table of Contents
Advertisement
All manuals and user guides at all-guides.com
DF500 Folder Operator Guide
Restoring a Batch Count
If you have set a batch of 50, for instance, and have taken a trial
piece or have run several pieces you cannot use, you may want to
restore the batch count to 50 before starting a folding run. Fol-
low the steps below to restore a batch count.
1. Press the Batch key (to turn batch off).
2. Press the Batch key a second time (batch setting mode on).
3. Press Enter. The batch count will be restored and the ma-
chine is ready to run a full batch.
22
SV40214 Rev. A
Advertisement
Table of Contents
