Table of Contents
Advertisement
All manuals and user guides at all-guides.com
DF500 Folder Operator Guide
Setting the Speed (continued)
The speed can also be changed while the machine is running.
1. Press the Speed key. The display will change to:
2. Use the " or ! keys to run slower or faster.
3. The speed will change instantly. You need not press the Enter
key to activate the new setting.
Running a Trial Piece
Always run a trial piece before starting a run. It is also a good
idea to run a trial piece each time a new stack of paper has been
loaded onto the feed table. This will prevent a jam if the stack
has been loaded incorrectly.
1. Press the Trial Piece key. A single sheet will be folded and
de liv ered to the stacker for you to check.
Startup
1. If you are happy with the trial piece, press the Start key to
begin the au to mat ic feeding and folding. The folded sheets
will be delivered neatly shingled on the stacker table.
2. Remove the folded sheets as soon as they start piling up in
front of the stacker extension.
3. When the entire paper stack has been fed the machine will
stop and the display will show:
4. Reload the feed table with a new stack of paper and press the
Enter key to clear the message on the display.
5. When the display shows 'Ready' , press the Start key to re-
sume folding.
14
SPEED
35
ØØØØØØ
– FAIL TO FEED –
DONE - Enter
TEMP JOB: 1
READY
ØØØØØØ
SV40214 Rev. A
Advertisement
Table of Contents
