All manuals and user guides at all-guides.com
Removing Fold Plates (continued)
5. Check for any paper in the fold plates or between the fold
rollers in the machine. Turn the rollers by hand or use the
hand wheel knob to make sure that all paper has been re-
moved.
6. Reinstall fold plates by sliding fold plate assembly back into
folder until it is supported by the latch mechanism.
7. Push up from bottom of fold plate assembly until you feel
and hear the latches fully engage.
8. Close fold plate compartment door.
CAUTION: If door does not close, the fold plate
assembly has not been installed correctly.
Redo Steps 6 and 7 above until you can close
the door properly.
9. Turn power on. The display will return to running mode and
folding may be resumed.
SV40214 Rev. A
DF500 Folder Operator Guide
35