Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Fine Tuning the Folder
Fold corrections can be made with the machine stopped or running.
Correcting a fold with the machine stopped...
1. Select which fold you want to correct by pressing the Fold 1
or Fold 2 key. (If a single fold is set, the Fold 2 key will not
respond). The display shows, for example:
2. Change the value by pressing the " or ! key, then press
Enter to confirm the new setting. The fold is now set and the
display shows:
3. If you try to start the machine without pressing Enter, the
display will prompt:
The machine will not start until you press either Enter or ! key.
Correcting a fold with the machine running...
1. Select which fold you want to correct by pressing the Fold 1
or Fold 2 key. (If a single fold is set, the Fold 2 key will not
respond). The display shows, for example:
FOLD 1 = 148.Ø
2. Change the value by pressing the " or ! key. You can judge
the result instantly by taking a folded sample from the stacker.
NOTE: This procedure should only be used to correct small
errors; oth er wise you will produce many reject sheets be-
fore you get the fold right.
3. The correction display will remain until you either press
Enter, Speed, or you stop the machine.
SV40214 Rev. A
DF500 Folder Operator Guide
T1 FOLD1 = 148.Ø
CHG:
DONE: Enter
TEMP JOB: 1
READY
ØØØØØØ
USE NEW SETTING?
YES: Enter
No:
or
ØØØØØ1
!
FOLD 2 = 74.Ø
ØØØØØ1
17
Advertisement
Table of Contents
