Table of Contents
Advertisement
All manuals and user guides at all-guides.com
DF500 Folder Operator Guide
Removing The Fold Plates
You will need to remove the fold plate assembly if paper is stalled
in this area and you have been unable to clear a jam as described
in the previous "Clearing a Jam" section.
CAUTION: Before opening the fold plate
door, always turn off the power first. This
will prevent any possibility of dam age to
the machine's electronic control system.
Follow the steps below to remove the fold plates.
1. Turn power OFF.
2. Open the fold
plate door by
pulling it away
from the ma-
chine. NOTE:
Some force may
be needed to
open the door.
The door will
stay in its up per -
most po si tion.
3. Press and release the two blue lock levers on either side of
fold plate assembly. This will cause the fold plate assembly to
drop slightly.
4. Grab the silver handle and lift the fold plate assembly up and
out.
34
Silver Handle
Fold Plate Assembly
Blue Lock Levers
(continued on next page)
Fold Plate Door
SV40214 Rev. A
Advertisement
Table of Contents
