Table of Contents
Advertisement
Steps
1. Using a 1/4-inch flat head or a Phillips #2 screwdriver rotate the lock counterclockwise to the unlock position.
2. Lift the release latch until the system cover slides back.
3. Lift the cover from the system.
Figure 14. Removing the system cover
Next steps
1.
Replace the system
cover.
Installing the system cover
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Ensure that all internal cables are connected and routed properly, and no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the guide slots on the system and slide the system cover.
2. Close the system cover release latch.
3. Using a 1/4-inch flat head or Phillips #2 screwdriver, rotate the lock clockwise to the lock position.
28
Installing and removing system components
Safety
instructions.
Before working inside your
system.
Advertisement
Table of Contents
