Table of Contents
Advertisement
NOTE:
For more information about the indicator codes, see the
Rear view of the system
Figure 5. Rear view of the system with 3 x LP PCIe slots
Table 4. Rear view of the system with 3 x LP PCIe slots
Item
Ports, panels, or slots
1
Power supply unit (PSU 1)
2
PCIe expansion card riser
(slot 1)
3
PCIe expansion card riser
(slot 2)
4
USB 2.0 port (1)
5
PCIe expansion card riser
(slot 3)
6
Power supply unit (PSU
2)
7
VGA port (on STD RIO
board)
8
USB 3.0 port (1)
9
iDRAC dedicated port
10
System identification
button
11
OCP NIC port (optional)
12
NIC port (2)
Icon
N/A
N/A
N/A
N/A
System diagnostics and indicator codes
Description
Indicates the PSU.
The expansion card riser enables you to connect PCI
Express expansion cards.
The expansion card riser enables you to connect PCI
Express expansion cards.
This port is USB 2.0-compliant.
The expansion card riser enables you to connect PCI
Express expansion cards.
Indicates the PSU.
Enables you to connect a display device to the system.
This port is USB 3.0-compliant.
Enables you to remotely access iDRAC. For more
information, see the iDRAC User's Guide at
poweredgemanuals.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 16
seconds.
NOTE:
● To reset iDRAC using system ID, ensure that the
system ID button is enabled in the iDRAC setup.
● If the system stops responding during POST, press
and hold the system ID button (for more than 5
seconds) to enter the BIOS progress mode.
This port supports OCP 3.0. The NIC ports are integrated
on the OCP card which is connected to the system board.
The NIC ports are embedded on the LOM card that is
connected to the system board.
Dell Technologies XC650 system overview
section.
www.dell.com/
11
Advertisement
Table of Contents
