Table of Contents
Advertisement
NOTE:
DIMM blanks to be removed for partial configurations with EXT heat sink having CPU TDP > 165 W.
Steps
1. Locate the appropriate memory module socket.
2. To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module
socket to fully open.
CAUTION:
Handle each memory module only by the card edges, ensuring not to touch the middle of the
memory module or metallic contacts.
3. Lift the memory module away from the system.
Figure 41. Removing a memory module
Next steps
1.
Replace the memory
module.
2. If you are removing the memory module permanently, install a memory module blank. The procedure to install a memory
module blank is similar to that of the memory module.
NOTE:
When operating your system with single processor, install memory module blanks in processor 2 memory
sockets.
.
Installing a memory module
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3.
Remove the air
shroud.
Steps
1. Locate the appropriate memory module socket.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
59
Advertisement
Table of Contents
