Do you have a question about the Norton 6000 Series and is the answer not in the manual?
Questions and answers
Rob Young
May 2, 2025
The door will close nice and steady until the last 12 inches and then it slams shut. Please advise on how to adjust the last 12 inches so the close does not slam shut.
1 comments:
Mr. Anderson
May 17, 2025
To prevent the Assa Abloy 6000 Series door from slamming shut in the last 12 inches, adjust the latch valve labeled "L". This valve controls the door speed during the final portion of closing (typically the last 10–15 degrees). Turn the valve to slow down the speed and reduce slamming.
Need help?
Do you have a question about the Norton 6000 Series and is the answer not in the manual?
Questions and answers
The door will close nice and steady until the last 12 inches and then it slams shut. Please advise on how to adjust the last 12 inches so the close does not slam shut.
To prevent the Assa Abloy 6000 Series door from slamming shut in the last 12 inches, adjust the latch valve labeled "L". This valve controls the door speed during the final portion of closing (typically the last 10–15 degrees). Turn the valve to slow down the speed and reduce slamming.
This answer is automatically generated