Assa Abloy NORTON RIXSON D6031 Series Installation Instructions Manual

D6021/D6031 Series
Double Unit Push Side Power Operator
Installation Instructions
WARNING
This product can expose you to lead which is known to the
state of California to cause cancer and birth defects or other
reproductive harm. For more information go to:
www.P65warnings.ca.gov.
D6021 Push Side
up to 110° opening
Backplate - LH
(D6001BP-36-LH
D6001BP-38-LH
D6001BP-40-LH
D6001BP-42-LH
D6001BP-44-LH
D6001BP-46-LH
D6001BP-48-LH)
Closer Assembly
(7500LAP)
End Cap - LH
(6001ENLH)
Operator LAP
(6021LAP)
(D6001COV-36
D6001COV-38
D6001COV-40
D6001COV-42
D6031 Push Side (Handed)
All components above with 6030-1W main arm and rod instead of 6020-1W
Tools Needed
#7 3/8
1/4-20
Ratchet
10" or 12"
with 11/16" socket
#2 & #3
(required for
6031 model)
The table below provides a list of documents associated with this product. These documents are available for download
from www.nortonrixson.com. If additional information or assistance is needed, contact Technical Product Support.
6000 Series Double Door Installation Programming Instructions
Template for installing conduit holes above frame (into wall)
D6021 Series Template
D6031 Series Template
Copyright © 2023, 2024, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1045-020 Rev 2 01/24
Conduit Assembly
Power Module
(D6001CON)
Sub-assembly
(6001PM)
Inverter
Power Supply
(6000IN)
(6000SUP)
Cover
D6001COV-44
D6001COV-46
D6001COV-48)
110° to 180° opening
Supplied Fasteners per Operator
Safety Glasses
(Fasteners for other installations
Set (Inch) Punch
Power Module Sub-assembly
Document Title
Approved 2024-02-13
Pour la version francaise voir NortonRixson.com.
READ AND FOLLOW ALL INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
Power Module
Sub-assembly
(6001PM)
Power Supply
(6000SUP)
Inverter
(6000IN)
Union Spacer
Union Spacer
(6001US)
Union Assembly
(D6001U)
NOTE: Fasteners shown are for
this specific installation.
are included in the package)
13x
Conduit Assembly 2x
End Caps Adjusting Tube
Union Assembly & Shoe
#8-32 x 5/16" 1/4-20 x 2"
Backplate - RH
(D6001BP-36-RH
D6001BP-38-RH
D6001BP-40-RH
D6001BP-42-RH
D6001BP-44-RH
Operator LAP
D6001BP-46-RH
(6021LAP)
D6001BP-48-RH)
Cover
(D6001COV-36 D6001COV-44
D6001COV-38 D6001COV-46
D6001COV-40 D6001COV-48)
(6001US)
D6001COV-42
Main Arm and Rod
(6020-1W) x2
Main Arm and Rod
(6030-1W)
2x 2x
Union Spacer Union Door
#6-32 x 1/4" #4-40 x 3/8"
1x 8x
Arm Operator LAP
1/4-20 x 1/2" 1/4-20 x 1/2"
Closer Assembly
(7500LAP)
End Cap - RH
(6001ENRH)
Adjusting Tube
and Shoe
(6620-12) x2
2x
Backplate
1/4-20 x 1"
OR
7x
Backplate
#14 x 1-1/2"
5x
Backplate
1/4-20 x 5/8"
Document Number
80-9360-1049-020
80-7360-1043-020
80-7360-1052-020
80-7360-1053-020