Assa Abloy NORTON RIXSON 5700 Series Installation Instructions Manual

5700 Series Power Operator
Pull and Push Side
Installation Instructions
WARNING
This product can expose you to lead which is known to the
state of California to cause cancer and birth defects or other
reproductive harm. For more information go to:
www.P65warnings.ca.gov.
Door Closer
(1601LAP)
On/Off
Switch
Circuit
Breaker
120VAC Electrical
Connections
Included with 5710 and 5740
Slide Arm Tube
Tools Needed
#7 1/4-20 3/8 3/16
Drill
#2
Screwdrivers Pencil
Strippers
The table below provides a list of documents associated with this product. These documents are available for download
from www.nortonrixson.com. If additional information or assistance is needed, contact Technical Product Support.
5700 Series Push to Pull Application Conversion Instruction Document
Series 5710 Pull Side Template
Series 5730 Push Side Template
Copyright © 2016, 2019, 2020, 2023-2024, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9357-0008-020 Rev 8 01/24
Motor Assembly
Backplate
(5700M)
Door Open/Closed
Position Magnets
Power Supply 1.1A
24V
Activation
Inputs
Slide Arm
Rod
9/64" Hex
Drive Socket
Screw
Slide Track Assembly
Buffer Stop
Supplied Fasteners
Safety Glasses
Tape
Measure
Punch
Wire
Document Title
Approved 2024-02-13
Pour la version francaise voir NortonRixson.com.
READ AND FOLLOW ALL INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
Inverter
Optional RF
(5700IN)
Receiver
Included with 5730 and 5740
Slider
Main Arm/Slide Unit
Assembly
1/8"
Conduit
Hex Wrench
Bracket
Cover
(5700CVR)
Connecting Link
Bushing Assembly
Shoe/Adjusting Rod
Assembly
Adjusting Tube
Main Arm
3x Track 1x
2x Arm Arm Operator
1/4-20 x 2" 1/4-20 x 1/2" #14 x 1-1/2"
Document Number
80-8357-0140-020
80-7357-0110-020
80-7357-0130-020
Shoe
Forearm
Screw
OR
6x 6x
Operator
1/4-20 x 1"