Table of Contents
Advertisement
press the key "NEAR"
Manual range: 0.000nF
d. Before connect test leads across two sides of the capacitor under measurement, be sure that the capacitor
has been discharged fully.
NOTE:
a.
The capacitance of a capacitor should be tested separately, should not test in the installation of circuit.
b.
To avoid electric shock, be sure the capacitors have been discharged fully before measuring the capacit
ance of a capacitor.
c.
While testing the capacitance of a capacitor to
660uF, the Max time will be 6.6 seconds, if the capacitor is leaked or damaged,
the data can't be read. The tester will be normal after disconnecting the capacitor.
Manual range and Auto range
When testing, click "Range select" to change the value, click "Auto range" to enter Auto measurement
→
6.600nF range
→
00.00nF
66.00nF range
→
000.0nF
660.0nF range
→
0.000uF
6.600μF range
→
00.00uF
66.00μF range
→
000.0uF
660.0μF range
→
0.000mF
6.600mF range
→
00.00mF
66.00mF range
- 77 -
Advertisement
Table of Contents
