Table of Contents
Advertisement
00.00A
NOTE:
◆ When only the figure "OL" is displayed, it indicates over range situation and the higher range has to be
selected.
◆ When the value scale to be measured is unknown beforehand, set the range selector at the highest
position.
◆ The maximum current of mA socket is 660mA; over-current will destroy the fuse, and will damage the
meter.
◆ The maximum current of 10A socket is 10A, over-current will destroy the meter, and will damage the
operator.
◆ In "AC" mode, only can input "AC", if not, will damage the meter.
E. Resistance Measuring
WARNING!
When measuring in-circuit resistance, be sure the circuit under test has all power removed and that
all capacitors have discharged fully.
a. Connect the black test lead to the "COM" jack and the red test lead to the "V/Ω" jack.
b. to select Ω, enter the Ω measurement the tester default Auto range status, Press the key manually select
range, Press "NEAR" to restore "Auto range"
Manual range: (Connect the red lead to black leads, will display the measure range)
→ 10.00A range（use 10A socket）
→ 660Ω
000.0Ω
0.000 KΩ → 6.600KΩ range
00.00 KΩ → 66.00KΩ range
000.0 KΩ → 660.0KΩ range
0.000 MΩ → 6.600MΩ range
- 75 -
range
Advertisement
Table of Contents
