Table of Contents
Advertisement
(3) 4 x zoom image display and Video out
When image input, press
Using the touch screen to control PTZ camera movement:
Tap left, right, upward or downward on the video image to move the PTZ camera in a desired direction.
Stretch two fingers outward or inward on the touch screen to zoom the image in or out.
If not use touch screen to operate, press the key
upward and downward key to move the image
For analog video input, as the resolution is 720 x 480, it is normal that the zoom in image is not clear.
But for network digital video input, as it supports resolution up to 480 x 320, the zoom in image is still very
clear. This is very helpful for IP camera installation.
(4) Snapshot
Click the icon "Snapshot", when the video in, to take a picture and save the current video frame in the SD card
as JPEG file.
If the unit is set to the manual mode an "Input Name" pop up box will appear and you can enter a title for the
snapshot. If the unit is set up to automatically set file names, this box will not pop up.
to enter "zoom", press it again to quit.
to zoom out, press the key
- 36 -
to zoom in, press
Advertisement
Table of Contents
