Table of Contents
Advertisement
Application
Power output function is mainly used in the camera field demonstration and testing, meanwhile, for some
camera installation sites, if there is no power outlet for the adapter to power the camera, the tester can offer
temporary power for it. But we do not suggest tester supply power for a long time.
Notice:
a.
Don't input any power into the "DC12/2A OUTPUT" port of the tester
b.
Man-made damage is not within our company's warranty
c.
The IP tester's power output capacity is 2A. If the IP camera uses more than 2A, the tester will
automatically enter a protection mode
d.
Disconnect all cables from the tester and reboot it to resume using the tester.
The IPC tester power output is close to 2A, if the IP camera's power is over 2V, the tester will auto
enter protection mode. Disconnect all the connections of the tester and then connect the tester with
power adaptor to resume the tester.
e.
Make sure the tester has a enough charge otherwise the tester will not able to provide enough output
power
- 103 -
Advertisement
Table of Contents
