Tdr Cable Test (*Optional) - OPTICOM LCDI-35T User Manual

Note: The battery of the cable tracer must according to corresponding positive pole + and negative
pole -, otherwise will damage the tester.
Note: While the cable tracer tester is receiving the audio signal from the tester, it may be influenced
by other signals and make some noise.

3.3.21 TDR cable test (*Optional)

Note: The testing cable can't be connected to any equipment, otherwise it will damage the tester.
Connect Alligator clip cable to the TDR port, and the cable must connect well before testing, otherwise it will
influence the accuracy. Click
Built-in BNC cable, network cable, RVV control cable, Telephone line and TVVB cable etc. can test. 11 groups
user-defined cable can be set.
Click "Cable" "Type" to select cable and start testing. One tap on "Start", do one testing. If select built in cable
type for testing, click "+" and "-" to adjust cables wave speed.
to enter, and click "Start" to test
- 67 -