Table of Contents
Advertisement
Application:
Add an IP camera or other network device to the current network group, the new IP address must not be
occupied, otherwise it will result IP conflicts and stop the equipment normal working. Link monitor can check
if the new setting IP address is occupied.
3.3.16 Rapid IP Discovery
Connect the cable to tester's LAN port. Press
Click "Start" to search all IP addresses of connected equipment in whole network segment.
Click "Stop" to stop work.
3.3.17 PoE power / DC12V 2A power output
When the tester turned on, the DC12V power output functions are automatically turned on.
To use the PoE Power Output function, click on the icon
IP camera needs to be connected to the LAN port before you turn PoE Power on. If the IP camera Supports
PoE, the PoE power is delivered via pins 1, 2, 3, and 6 on the LAN port. The IP tester will display "48V ON" at
the top of the screen when the POE power is still on.
to enter Rapid IP Discovery app.
and change the switch "ON" or "OFF". The
- 61 -
Advertisement
Table of Contents
