Table of Contents
Advertisement
display on the screen and output, click
to return main menu.
Application
BNC loop test: Tester can send and receive color bar generator through the tester's "video out and video in"
port, it is for testing transmission channels, such as video Optical, video cables etc. The tester "VIDEO OUT"
port to connect optical terminal's sending port, and "VIDEO IN" Port to optical terminal' s connect its
receiving port.
A. When maintaining the dome camera, the tester sends out the color bar by its BNC output to the monitor at
the monitoring center. If the monitor receive the color bar, it means the video transmit channel works
normally. Meanwhile on the basis of the received color bar, the monitoring center can judge if transmission
has loss or interference.
B. The tester sends out the pure color bar (such as white and black color), to test the monitor whether has
bright or black dots
C. The tester sends out video signal image to test if the image received by the monitor has excursion.
3.3.12 CVI camera test (*Optional)
HD CVI camera, CVI dome camera test and PTZ control, click icon
to enter
- 42 -
Advertisement
Table of Contents
