Table of Contents
Advertisement
3.2.3 HD Coaxial camera connection
* CVI, TVI, AHD camera are classified as HD coaxial cameras. Hereby the following instruction of how
to connect TVI camera to the tester is also applied to CVI and AHD camera.
(1) Connect the TVI camera's video output to the IP tester's "TVI IN" interface, the image will display
on the tester. The tester only come with TVI input interface. There is no TVI output interface.
(2) Connect the TVI camera or the speed dome RS485 controller cable to the tester RS485 interface.
3.3 OSD menu
◼
Press the key
◼
Press the key
◼
short press the key
abnormally and cannot be turned off , Press the key
tester reset
2 seconds to turn on
2 seconds to turn off
to enter sleep mode, press it again to test if tester work
- 10 -
several seconds to turn off, the
Advertisement
Table of Contents
