Table of Contents
Advertisement
（4）Port Flashing
Connect a network cable to the meter's "LAN" port, click the icon
to open the Port Flashing app. Click
"Start", the IP tester sends a unique signal to make the connected LAN port of the switch flash.
If the tester and PoE switch are connected well, the LAN port of POE switch flash at special frequency, if not,
no any changes on the LAN port
Application:
The tester will send special signals to make the connected LAN port flicker at special frequency, which will
enable the installers to easily and quickly find the connected Ethernet cable. This function can prevent
mistakenly insertion or disconnection non-corresponding cable to artificially interrupt network
connection.
- 58 -
Advertisement
Table of Contents
