2）Ping Test; 3）Network Test (Ethernet Bandwidth Test) - OPTICOM LCDI-35T User Manual

（2）PING Test
Connect a network cable to the LAN port and click the
LOCAL (native) IP address, Remote IP address (e.g. IP camera), Packet count, Packet Size, Packet time and
Timeout. Press "Start" to start pinging. If the IP camera or network device is not configured properly or not
plugged in, it will say "Destination host unreachable" or have 100% packet loss. If the tester connects to the
device, the send and receive packets will have a 0% packet loss.
Application: PING testing is the most conventional network debugging tools. It is used for testing if the
connected IP camera or other network equipment's Ethernet port is working normally and the IP address is
correct.
It's normal that the first data packet will be lost when test start.
（3）Network test (Ethernet bandwidth test)
Network test (Ethernet bandwidth test)
To use the Network tester, you will need two IP testers. One is used as a Server and the other as a Client. Both
devices must be on the same network segment in order to communicate. Click the
Network Tester app.
icon to open the PING tool. You can set your
- 54 -
icon to open the