Mitsubishi Electric ME96SSH-MB User Manual page 21

3. Setting
3.3 Setting Menu 2: Communication Settings(Setting the MODBUS
communication)
⑥
CC-Link station
number
DISPLAY SET
⑦
CC-Link baud rates
DISPLAY SET
⑧
CC-Link version
DISPLAY SET
⑨Communication
reset
SET
Setting Menu
Set the CC-Link station number.
When the ME-0040C-SS96 optional plug-in module is not installed,
or the CC-Link communication is not selected in
 Communication method selection, this display will be skipped.
Selectable station number:
Set the CC-Link baud rate.
When the ME-0040C-SS96 optional plug-in module is not installed,
or the CC-Link communication is not selected in
 Communication method selection, this display will be skipped.
156kbps
625ｋbps
2.5Mbps
5Mbps
10Mbps
Set the CC-Link version according to the configuration of the
used CC-LInk system.
When the ME-0040C-SS96 optional plug-in module is not installed,
or the CC-Link communication is not selected in
 Communication method selection, this display will be skipped.
Version 1.10
When the changed above settings are enabled, set to "on."
（When it is not set to "on," the changed settings do not become effective.）
When the ME-0040C-SS96 optional plug-in module is not installed,
or the CC-Link communication is not selected in
 Communication method selection, this display will be skipped
oFF on
According to the setting flow diagram (page 14), save the changed
contents, or continue to the other setting menu.
®
RTU communication and CC-Link
1 to 64
Version 2.00
- 20 -