Touch For Auto Bed Leveling (Optional); Printing Parameters - Geeetech A30 User Manual

7.3 3D Touch for auto bed leveling (Optional)
This printer supports auto bed leveling. Refer to the link below to know how to install the 3d
touch sensor.
Youtube
https://www.youtube.com/watch?v=_RtsZDbR2po&t=66s
Visit our official forum:
http://www.geeetech.com/forum/

8 Printing Parameters

Printing technology: FDM
Printing volume: 320*320*420mm
Printing accuracy: 0.1mm
Position precision: X/Y: 0.11mm
Printing speed: 60mm/s
Nozzle quantity: single nozzle
Nozzle diameter: 0.4mm
Filament diameter: 1.75mm
Filament: ABS/ PLA, etc.
1) Temperature Parameters
Environment temperature: 10℃-40℃
Nozzle temperature: Max temp 250℃
Hot bed temperature: Max temp 110℃
2) Software Parameter
Shenzhen Getech Technology Co.,Ltd
(Picture 7-8)
3
Z: 0.0025mm
48