Geeetech A30 User Manual page 21

Please choose its precision firstly before moving axes. There are "30/10/1/0.5/0.1mm" available.
And control every axis moving. Moreover, when the bottom right corner motor status is in the
"Enable" state, motor is locked. When "Disable" releases, motor is unlocked, you can move every
axis by hand.
3) Click "Motion Parameter", it will enter motion parm interface. See picture (5-8).
This page only displays every motion parameter, if no special condition, it doesn't to be modified.
4) Click "Leveling" to its interface. See picture (5-9).
Shenzhen Getech Technology Co.,Ltd
(Picture 5-7)
(Picture 5-8)
21