Usb Printing - Geeetech A30 User Manual

Now parameters setting are finished.

6.3 USB printing

You can start USB printing when the parameters setting finished.
The model file format is .stl for 3D printer. You can download free models from websites such as
thingiverse. You can also design your own models.
1) Load the printing model
Open the Repetier-Host and click "load". Choose a file and open it. See picture (6-21)(6-22).
When model is loaded, you can use the buttons as picture below (picture 6-23) to zoom in, zoom
Shenzhen Getech Technology Co.,Ltd
(Picture 6-21)
(Picture 6-22)
39