Usb Printing - Geeetech A10T User Manual

8.3 USB printing

You can start USB printing when the parameters setting are finished.
The model file format is .stl for 3D printer. You can download free models from websites such as
thingiverse. You can also design your own models.
com

Load the printing model
Open the Repetier-Host and click "load". Choose a file and open it. See picture (8-21, 8-22).
When it is loaded, you can use the buttons as picture below (picture 8-23) to zoom in, zoom out
or rotate the model.
Shenzhen Getech Technology Co.,Ltd
(Picture 8-21)
(Picture 8-22)
39