Gasket And O-Ring - Xylem MJK pHix Compact V3 Manual

pHix® Compact V3. NG (next generation)
EN 4.10 Version 2103
Contact MJK if other electrode types should be used. Replacement of an
electrode to another of the same type does not require reconfiguration.
The electrode must not become dry. Therefore, do not remove the protective
cap before before commissioning of pHix® Compact.

Gasket and O-ring

It is very important that both gasket and O-ring and packing surfaces are clean
and smooth and without cracks and scratches to avoid penetration of liquid in
the center plug connection.
Check that gasket and O-ring are complete and clean and that they are placed
correctly.
Likewise, the connectors in both transmitter and electrode should be absolutely
clean and dry. Use a dry cloth if needed.
Mounting /Mounting the electrode
11