Inserting And Removing An Electronic Module - Pilz PSSu E F 4DI Operating Manual

Installation
Schematic representation:
5.3

Inserting and removing an electronic module

Please note:
}
Only insert on to base modules that are already installed.
}
Preferably these base modules should be ready wired.
}
Electronic modules with outputs may only be inserted and removed when the load is
switched off. Unforeseeable error reactions may be triggered if modules are inserted
and removed under load.
}
When an electronic module is plugged into a base module for the first time, one part of
the coding element remains on the electronic module, while its counterpart is fixed on to
the base module. This is how the base module is coded.
}
The mechanics of the electronic modules are designed for 50 plug in/out cycles.
Operating Manual PSSu E F 4DI(-T)(-R),
21310-EN-08
[2]
[1]
[3]
17