Cleaning The Extractor - Caple DD925CO Instruction Manual

C L E A N I N G T H E E X T R A C T O R
Careful maintenance helps to ensure the correct operation and good performance over time.
C AU T I O N :
The hood must be disconnected from the electrical network, both by unplugging the appliance
from the socket and activating the magnetic circuit breaker (safety cut-out), before removing the
metal grease filters. After cleaning, replace the metal grease filters as outlined in the
installation instructions.
M A I N T E N A N C E H O W TO P R O C E E D ?
External surfaces Do not use metallic scrubbers,
and accessories abrasive products, or hard brushes.
Active charcoal filter In the recirculation mode, the active
charcoal filter must be replaced
periodically.
To remove the charcoal filter first
remove the grease filter and then pull
the plastic key of the panel itself, in
order to disengage it from its seating.
Follow these steps in reverse order to
insert the active charcoal filter.
Replace the used charcoal filter on an
average of every six months.
22 Instruction manual DD925CO
A C C E S S O RY P R O D U C T S TO U S E
To clean the external surfaces of the cooker hood
and the light housing screen use only
commercially avail-able household detergents
diluted in water. Then rinse with clean water and
dry with a soft cloth.
Please keep this instruction manual for future reference