Cleaning The Extractor - Caple DD606BK Instruction Manual

C L E A N I N G T H E E X T R A C T O R

Cleaning the extractor

Careful maintenance helps to ensure the correct operation and good performance over time.
C AU T I O N :
Careful maintenance helps to ensure the correct operation and good performance over time.
The hood must be disconnected from the electrical network, both by unplugging the appliance
from the socket and activating the magnetic circuit breaker (safety cut-out), before removing the
metal grease filters. After cleaning, replace the metal grease filters as outlined in the
The hood must be disconnected from the electrical network, both by unplugging the appliance from
installation instructions.
the socket and activating the magnetic circuit breaker (safety cut-out), before removing the metal
grease filters. After cleaning, replace the metal grease filters as outlined in the installation
instructions.
M A I N T E N A N C E
MAINTENANCE
External surfaces
and accessories
External surfaces and
accessories
Grease filter with
extractable unit open
Grease filter with
extractable unit open
Active charcoal filter
Active charcoal filter
CAUTION
H O W TO P R O C E E D ?
HOW TO PROCEED?
Do not use metallic scrubbers,
Do not use metallic scrubbers,
abrasive products, or hard brushes.
abrasive products or hard brushes.
After 30 hours of operation, the
After 30 hours of operation,
downdraft will signal the grease filter
the downdraft will signal the grease
saturation.
filter saturation.
The saturation is signalled by the
The saturation is signaled by the
blinking of the 4 central LED's.
blinking of the 4 central leds.To
To reset, hold down the timer button reset, hold down the timer button
for at least 3 seconds, while the
for at least 3 seconds, while the
carriage is open.
carriage is open.
In the recirculation mode, the active
In the recirculation mode, the
charcoal filter must be replaced
active charcoal filter must be
periodically.
replaced periodically. To remove the
To remove the charcoal filter first
charcoal filter first of all it is
remove the grease filter and then pull
necessary to remove the grease
the plastic key of the panel itself, in
filter and then pull the plastic key
order to disengage it from its seating.
of the panel itself, in order to
Follow these steps in reverse order to
disengage it from its seating.
insert the active charcoal filter.
Follow these steps in reverse order to
Replace the used charcoal filter on an
insert the active charcoal filter.
average of every six months.
Replace the used charcoal filter on
an average of every six months.
Please keep this instruction manual for future reference
A C C E S S O RY P R O D U C T S TO U S E
ADDITIONAL PRODUCTS TO
USE
To clean the external surfaces of the cooker hood
To clean the external surfaces of the
and the light housing screen use only
cooker hood and the light housing
commercially avail-able household detergents
screen use only commercially avail-
diluted in water. Then rinse with clean water and
able household detergents diluted
dry with a soft cloth.
in water. Then rinse with clean
water and dry with a soft cloth.
The grease filters can be washed by hand or in
The grease filters can be washed by
the dishwasher. These filters need to be cleaned
hand or in the dishwasher. These
on a regular basis, because otherwise they may
filters need to be cleaned on a
represent a fire risk.
regular basis, because otherwise
Refit the grease filters and front panel, making
they may represent a fire risk.
sure that the panel is properly fitted at the sides,
Refit the grease filters and
otherwise it may cause the downdraft to stop
front panel, making sure that the
operating.
panel is properly fitted at the sides,
otherwise it may cause the
downdraft to stop operating.
Instruction manual DD606BK
13
19