Subscribe to Our Youtube Channel
Related Manuals for Caple DD910BK
Summary of Contents for Caple DD910BK
- Page 1 Instruction manual for downdraft hood Model code: DD910BK - DD910SS Contact Caple on 0844 800 3830 or for spare parts www.4caple.co.uk...
- Page 2 Instruction manual for downdraft hood Model code: DD910BK - DD910SS Contact Caple on 0844 800 3830 or for spare parts www.4caple.co.uk...
- Page 4 This appliance is marked according to the European directive 2002/96/EC on waste electrical and electronic equipment (WEEE). DD910BK - DD910SS...
- Page 5 Always disconnect the hood before carrying out cleaning or maintenance operations. • Adequately ventilate the room when a cooker hoodand other appliances, powered by en- ergy other than electricity, are used simultane- ously, so that the hood does not suck any- combustion fumes. DD910BK - DD910SS...
- Page 6 DESCRIPTION OF THE APPLIANCE ....................6 INSTALLING THE HOOD ........................7 Grease filter removal, mounting the activated charcoal filter ............8 Electrical connection of the hood ....................9 HOW THE COOKER HOOD WORKS ....................10 CLEANING THE HOOD ........................12 OPERATIONAL ANOMALIES ......................13 AFTER SALES SERVICE........................13 DD910BK - DD910SS...
- Page 7 DESCRIPTION OF THE APPLIANCE DD910BK - DD910SS...
- Page 8 In the version with the motor already safety control, 4 pole connector for neon installed, remove the screws and the suc- lamp turn on and push-button connector) tioning unit in order to insert the down-draft (Fig. 10). in the hole made. DD910BK - DD910SS...
- Page 9 After having replaced the filters, reinstall the In case of outside air discharge installation, fit a front stainless steel pan’el, otherwise the non-return valve to prevent wind and back air Downdraft is not enabled to function. from entering. DD910BK - DD910SS...
- Page 10 The downdraft connection to the electrical network must be carried out only by profes- sional and qualified technicians. The downdraft must be connected to a properly installed and suitable electrical network. The electrical system must comply with VDE0100 standard. DD910BK - DD910SS...
Need help?
Do you have a question about the DD910BK and is the answer not in the manual?
Questions and answers