Related Manuals for Caple DD911BK
Summary of Contents for Caple DD911BK
- Page 1 Instruction manual for downdraft hood Model code: DD911BK DD911SS DD911WH DD120BK Contact Caple on 0117 938 7420 or for spare parts www.caple.co.uk...
-
Page 3: Environmental Protection
Environmental protection The symbol on the product or on its packaging indicates that this product may not be treated as house- hold waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent poten-tial negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. - Page 4 • Any consequences of or damage from incor- Caple. rect installation or incorrect use of the appli- The air collected must not be conveyed into a ance will not be covered by the manufactur- flue used for smoke or fumes from er’s guarantee.
-
Page 5: Table Of Contents
Contents Dimensions Installing the extractor Grease filter removal, installing the activated charcoal filter Electrical connection How the downdraft works Cleaning the extractor Troubleshooting Aftersales service... -
Page 6: Dimensions
Dimensions... -
Page 7: Installing The Extractor
4. Put the Downdraft in the opening, inserting it Installing the extractor from above as shown in (Fig. 2). 5. Fix the downdraft inside the cabinet, using the special fixing brackets supplied with the product (Fig. 3). 1. Before carrying out the appliance installa- Insert the brackets in the lower side of the tion, please check that all components are downdraft (Fig. -
Page 8: Grease Filter Removal, Installing The Activated Charcoal Filter
9. Connnect the internal or external motors cable to the terminal board found 9. For external motors, connect the motor unit 9. For external motors, connect the motor unit Recirculating mode Recirculating mode inside the plastic box of the downdraft cable to the relevant connector on the cable to the relevant connector on the In case fumes and vapour cannot be evacuated... -
Page 9: Electrical Connection
(RCD), with a nominal • The cable diameter complies with instal- residual current not exceeding 30mA. If lation regulations. the power cord is damaged, call the Caple Service to avoid any risk. WARNING The downdraft connection to the electrical network must be carried out only by profes- sional and qualified technicians. -
Page 10: How The Downdraft Works
How the downdraft works Timer 10 min after setting, it serves to stop the ex- tractor motor, close the carriage and switch the lights off, if they are on. The set function is MODEL DD911 signalled by the flashing LEDs “D” for the set speed. - Page 11 Security saftey system: If there is an obstacle while the extractable unit is closing, the Downdraft stops closing and rises again thanks to a security system. WARNING This operation has to be carried out by a specialised technician. TIMING As a result of the new EU65 “Energy label” and EU66 “...
-
Page 12: Cleaning The Extractor
Cleaning the extractor Careful maintenance ensures the correct operation and optimal performance. CAUTION The hood must be disconnected from the electrical network, both by unplugging the appliance from the socket and activating the magnetic circuit breaker (safety cut-out), before removing the metal grease filters. -
Page 13: Troubleshooting
• Either your retailer; • Or another qualified professional technician, authorised for Caple appliances. You can contact Caple Service by telephone on 0117 938 7420 or by email service@caple.co.uk NOTE When calling, please mention the appliance details (Type Fig. 13a and equipment Fig. 13b and production date Fig. - Page 15 Images...
- Page 16 2 mm...
- Page 18 10/09 90002103999 220 - 240V - 50 HZ ATTUATORE 12Vcc 68W EQUIPMENT TYPE FSEE S - 002 - EM_TC X22 - Q3 - X0...
- Page 20 Serial number Caple Fourth Way Avonmouth Bristol BS11 8DW www.caple.co.uk 90002422911 - GM 04/15 90002422415 - GM 02/12...