Advertisement
Quick Links
For Models
Communication
Holovision VoIP Intercom for use with Crestron,
SIP or Savant IPBx.
VIO
2
Everyday VoIP from Holovision
12 VDC from Relay
PoE
Manual Type 1.0.0.10 RF
Holovision VIO2 Intercom
420-VIO2
421-VIO2
Specifications
Access Control
Dry-contact relay available over the network
Mic +
Mic -
Spk -
Spk +
Button
Button
Gnd
NC
NO
COM
OFF
On
From PoE Plus Switch or Injector
Out to Gate,Strike or Lock
INSTALLATION
INSTRUCTIONS
501 E. Goetz Ave.
Santa Ana, Ca 92707
www.eholovision.com
Ph. 714-434-6904
Fax 800-362-0002
HOLOVISION
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HOLOVISION 420-VIO2
Summary of Contents for HOLOVISION 420-VIO2
- Page 1 Manual Type 1.0.0.10 RF Holovision VIO2 Intercom For Models 420-VIO2 421-VIO2 Specifications Communication Access Control Holovision VoIP Intercom for use with Crestron, Dry-contact relay available over the network SIP or Savant IPBx. Mic + Mic - Spk - Spk + Button Button 501 E.
- Page 2 VIO(sip) QUICK START & " " "...
- Page 4 VIO RAVA Quick Start 1. Plug the device into the network. Device will speak it’s IP address. 2. Navigate to device IP on a web browser. 3. Under “Configuration” please enter SIP ID for the name to be displayed, and enter the extension of the Main RAVA Touchscreenunder “Input Call ID 0 Default is CALL:CRESTRON”...
- Page 5 5. Configure the relay setting under “Inbound Calls”. Configure the powered relay and the dry contact closure. Choose any 2 to 4 digit combination Note; By configuring the request to exit feature you can configure for either relay. 6. Once the device has been configured you can initiate the call by pressing the button...
- Page 6 501 E. Goetz Ave. Santa Ana, Ca 92707 Ph. 714-434-6904 Fax 800-362-0002 www.eholovision.com...
Need help?
Do you have a question about the 420-VIO2 and is the answer not in the manual?
Questions and answers