Subscribe to Our Youtube Channel
Related Manuals for Siegenia AERO AEROMAT 80
Summary of Contents for Siegenia AERO AEROMAT 80
- Page 1 ASSEMBLY AND OPERATING INSTRUCTIONS AERO AEROMAT 80 Sound absorbing ventilator. Window systems Door systems Comfort systems...
-
Page 3: Table Of Contents
Assembly and operating instructions AEROMAT 80 Contents Target group of this documentation ..............................4 Intended use ....................................4 Installation ....................................... 5 Unit description ....................................6 Operation ......................................7 Maintenance ....................................7 Cleaning ......................................7 Accessories ..................................... 9 Technical specifications ................................10 Dimensions ....................................10 08.2021... -
Page 4: Target Group Of This Documentation
• Any use of this product that is not in accordance with its correct use, or any adaptation of or modification to the product and its associated components for which the express consent of SIEGENIA has not been obtained, is strictly prohibited. SIEGENIA accepts no liability whatsoever for any material losses or injury to people caused by failure to comply with this stipulation. -
Page 5: Installation
Assembly and operating instructions AEROMAT 80 Installation Prerequisites for installation • The position from which the outdoor air is drawn in must be selected in such way that any nearby emission sources have as little impact as possible on the quality of the air being drawn in. •... -
Page 6: Unit Description
AEROMAT 80 Assembly and operating instructions Unit description Depending on its version, the AEROMAT 80 is delivered with a left or right-hand operating lever. On the respective opposite side, there is a small screw for the pressure setting of the fan flap. 1. -
Page 7: Operation
• Slightly turn the screw into the desired direction using an appropriate screwdriver. (+ = increase the compression strength; - = decrease the compression strength) Besides cleaning it, the AEROMAT 80 does not need any further maintenance. If any malfunctions arise, please contact SIEGENIA. Cleaning Caution! ›... - Page 8 AEROMAT 80 Assembly and operating instructions Cleaning the front panel and sealing plate 1. Close the fan flap. 2. Lift and remove lid using a flathead screwdriver 3. Lift front panel using a flathead screwdriver 4. Pull out front panel and sealing plate from behind and pull off of the operating lever 5.
-
Page 9: Accessories
Assembly and operating instructions AEROMAT 80 Accessories Rod operating device (optional) The ventilator/fan/blower can be operated using a sliding button on the rod. Push the sliding button up or down to do this. The sliding button’s "Open" and "Close" positions (or intermediate positions) correspond to the positions of the operating lever on the unit. -
Page 10: Technical Specifications
AEROMAT 80 Assembly and operating instructions Technical specifications Specifications for AEROMAT 80 Sound absorption (R 40 dB 36 dB 33 dB 21 dB w1.9 Sound absorption in accordance with DIN EN ISO 47 dB 43 dB 40 dB 28 dB 20140-10 (D n,e,w Air throughput (approx.) - Page 12 Switzerland Phone: +41 33 3461010 Germany Phone: +49 271 39310 Turkey Phone: +90 216 5934151 You can fi nd address details for our Great Britain Phone: +44 2476 622000 Ukraine Phone: +380 44 4637979 international sites at: www.siegenia.com Contact your dealer:...
Need help?
Do you have a question about the AERO AEROMAT 80 and is the answer not in the manual?
Questions and answers