Table of Contents
Advertisement
CONNECTION DIAGRAM
Caution! Voltage of heating elements 220-240V
Caution! In the event of any connection the safety
Wire must be connected to the
For 220-240V earthed one-phase connection, bridges
connect L
terminals and N
①-②
• If the appliance is being connected directly to the mains an omnipolar circuit-breaker must be
installed with a minimum opening of 3mm between contacts.
• If the cable is damaged or is to be replaced, the operation must be carried out by a qualified
person.
• The installer must ensure that the correct electrical connection has been made and that it is
compliant with safety regulations.
• The cable must not be bent or compressed.
• The installer must use the supplied power cord.
DISPOSAL: Do not
dispose this product
as unsorted municipal waste.
Collection of
such waste separately for
special treatment is necessary.
E terminal.
terminals, safety
④-⑤
wire to
This appliance is labeled in compliance with European directive 2012/19/EC for
Waste Electrical and Electronic Equipment (WEEE). By ensuring that this
appliance is disposed of correctly, you will help prevent any possible damage to
the environment and to human health, which might otherwise be caused if it
were disposed of in the
wrong way.
The symbol on the product indicates that it may not be treated as normal
household waste. It should be taken to a collection point for the recycling of
electrical and electronic goods.
This appliance requires specialist waste disposal. For further information
regarding the treatment, recover and recycling of this product please contact
your local council or your household waste disposal service.
For more detailed information about treatment, recovery and recycling of this
product, please contact your local city office or your household waste disposal
service.
④
⑤
②
①
④
⑤
②
L
①
21
Recommended
type of
connection lead
N
E
Advertisement
Table of Contents
