Subscribe to Our Youtube Channel
Related Manuals for Parmco HO-4-77NF-CER-T
Summary of Contents for Parmco HO-4-77NF-CER-T
- Page 1 Installation and Operating Instructions Models: HO-4-77NF-CER-T For your convenience, we recommend to attach the serial number label HERE. 727626032017...
- Page 2 • Normal or scheduled maintenance including blocked filters or ducting. Please retain this Warranty card together with receipt or other proof of purchase date when seeking service during the warranty period • Consumable items such as light bulbs. • Any damage to hobs caused by spills when cooking. • Any breakage or damage of glass items. • Any damage caused by non recommended product used for cleaning, Please contact Parmco at 09 573 5678 if your maintaining, lubricating or similar. appliance needs servicing under warranty. Please • Any aspect relating to the installation of the product, or damage caused have your model number and proof of purchase ready. during installation including blocked access for repair. Warranty repairs must be authorized by Parmco. • Any third party (including reseller) or consequential loss or damage (direct or indirect) however arising. Subject to updates without prior notice, please visit www.parmco.co.nz for E & O.E. 727626032017 the latest version.
- Page 3 Parmco Appliances before any installation is carried out. We hope you enjoy your new appliance. If you would like to find out more about this product or any other products in Parmco’s extensive range, visit us on the web at www.parmco.co.nz. Regards,...
- Page 4 Metallic objects such as knives, forks, spoons and lids should not be placed on the hotplate since they will get hot. If the surface is cracked, switch off the appliance and contact Parmco Appliances. To avoid the possibility of electric shock do not continue to use a damaged hob.
- Page 5 CAUTIONS - READ CAREFULLY • Any installation of this or any other Parmco Appliances hob must be carried out by a qualified technician and in accordance with the regulations in force relating the electric ceramic and induction hobs. • Check the hob for any damage that may have been caused during transport. Never install a damaged appliance.
-
Page 6: Table Of Contents
Standards and Regulatory Requirements with particular reference to the New Zealand Electrical Standards. Any attempt to install this or any other Parmco product without an authorised person could result in damage to the product and a possible health hazard. Not having an authorised person install this appliance may result in all associated warranties from Parmco Appliances being null and void. -
Page 7: Specifications
Working Principle The HO-4 Parmco hob employs sophisticated microcomputer technology. This controls all aspects of the hobs heating and timing requirements. The heat resistant wiring ensures longevity, while the advanced heating technology provides all the benefits ceramic cooking can offer. -
Page 8: Installation
INSTALLATION 1. Cut a hole in the table surface according to the size shown in the drawing. For the purpose of installation and use, a minimum of 50mm space shall be preserved around the hole. Be sure the thickness of the table surface is at least 30mm. -
Page 9: Wiring Information
CAUTIONS The ceramic hob must only be installed by a qualified technician. The hob shall not be mounted to cooling equipment, dishwashers and rotary dryers etc. To avoid any damage, the benchtop and adhesive must be made of suitable heat resistant properties. A steam cleaner is not to be used. -
Page 10: Features
FEATURES 1. Hob layout 2. Heating Zones Power Ratings 3. Control Interface Description OPERATING YOUR HOB After turning the hob on, the buzzer will beep once, all indicators will light up for 1 second then go out. This indicates the hob is active, and is now in standby mode. Operation Instructions: Switch on the ceramic hob by pressing the “On/Off”... - Page 11 OPERATING YOUR HOB Timing function Cooking Timer Select one cooking zone by pressing the “-” or “+” of the corresponding heating zone. The cooking zones display light will now flash. Adjust timer by using the +/- buttons of the timer. After the timer indicator display has flashed for 5 seconds, the timer is confirmed.
-
Page 12: Safety Reminders
Safety Reminders & Maintenance Safety Reminders and Maintenance Do not put any detergents or flammable materials in the equipment installed under the ceramic hob. Metallic objects such as knives, forks, spoons and lids should not be placed on the hotplate as they can get hot. -
Page 13: Cleaning
Cleaning & Maintenance You can easily clean the surface of the ceramic hob by following the methods given in the table. Type of contamination Method of cleaning Articles used for cleaning Clean with hot water and Light Cleaning sponge. damp sponge. Accumulation of dirt Clean with hot water and Special cleaning sponge for...
Need help?
Do you have a question about the HO-4-77NF-CER-T and is the answer not in the manual?
Questions and answers