Using The Bridge - Parmco HX-2-6NF-ZLIND Installation And Operating Instructions Manual

4. Beware of hot surfaces
• "H" will show which cooking zone is still hot to touch. The signal will disappear when the
surface has cooled down to a safe temperature. It can also be used as an energy
saving function - if you want to heat further pans, use the hotplate that is still hot.
Note: the residual heat indicator will disappear if the main power supply to the hob is turned off.
Using the Bridge （Maximum power 3000W）
To Turn On a Bridge:
1. Touch the desired Left/right side bridge.
Indicator to the right of bridge will be illuminated. The heat setting levels for the
cooking areas will default to "0" and can be set from a minimum of "1" to a
maximum of "9." Any timers that may be running for the cooking areas will turn
off, and 2 dashes "--" will appear in the timer display.
2. Touch the Power / Timer regulating key to change the power level up or
down.The selected heat level will show in the heat level display for each cooking
area using the bridge.
To Turn Off a Bridge:
Touch the bridge for the zone being used.
The bridge cooking areas will resume operation as 2 separate areas.
8