When You Have Finished Cooking - Parmco HX-2-6NF-ZLIND Installation And Operating Instructions Manual

2. Touch the
After switching the power on, the buzzer beeps once. All displays
show " – " or " – – ", indicating that the induction hob has entered standby mode.
Note: if the display flashes "
• Pan has not been placed on the correct cooking zone
• Pan is not suitable for induction hob.
• Pan is too small and can not be detected, or not positioned correctly.
3. Touch the cooking zone you wish to use.
4. Select a heat setting by touching the "-/+" regulating controls
• If you do not choose a heat setting within 1 minute, the Induction hob will
automatically switch back to standby mode. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
When you have finished cooking
1. Touch the cooking zone selection control that you wish to switch off.
2. Turn the cooking zone off by scrolling down to "0 " using the "-" regulating
control.
The display will then show "H"
3. Alternatively turn the whole cooktop off by touching the ON/OFF control
ON/OFF control
", alternatively with the heat setting, this means:
7