Maintenance; Required Tools And Equipment; Preventive Maintenance - Javo Traytopper User Manual

Table of Contents

Advertisement

7 Maintenance

Follow all instructions described in this manual, in particular chapter safety.
Maintenance of this machine must be performed in compliance with warnings on the machine and in
accordance with the user manual by qualified personnel.
Keep hands, hair, loose clothing and / or jewelry away from moving parts of the machine. Wear appropriate
clothing without loose parts. Wear non-slip work shoes.
As long as the machine is on, no connection or safety devices may be removed. The machine may only be
used when all protective devices and safety-related facilities are available and ready for use.
Always unplug the plug from the socket before starting maintenance. Wear personal protective equipment
(see section 2.3).
Inform operating personnel before start maintenance. Interrupt if possible the power (mains), before the
machine is investigated or maintained by turning off the main switch and locking it and pull the plug from
the socket. If work must be done with power supply (mains) voltage on the machine, work with an additional
person who can operate the emergency stop.

7.1 Required tools and equipment

A set of keys is included with the machine, consisting of:
A. Allan key 4mm
B. Door key
C. Spanner 24-27mm
D. Spanner 17-19mm
E. Spanner 10-13mm

7.2 Preventive Maintenance

For the following maintenance instructions normal use is considered. With heavy use, or use under extreme
conditions, maintenance should be performed at shorter intervals.
Item
Machine
Elevator and belts
Materials in the machine
Safety components
Pictograms
Elevator
Electrical installation
Electric motors
Version 2016-2
1x per...
Comments
Day
Check if moving parts are functioning correctly and not clamping and /
or parts are broken or damaged in such a way that the operation is
adversely affected. Have damaged parts repaired before use.
Day
Check tension. See section "Mounting, installation and commisioning".
Day
Remove trays or other material that has fallen into the machine before
starting the machine.
Week
Test the safety circuit. See section "Test safety circuit".
Week
Check readability and replace if necessary.
160 hour
Cleaning. See section "Elevator cleaning".
Year
Check for damage.
Year
Remove dust.
User Manual Javo Traytopper
15

Advertisement

Table of Contents
loading

Table of Contents