Table of Contents
Advertisement
1 Technical specifications and tolerances
This machine is intended to be used for filling trays automatically with substrate only. This machine is meant for
processing trays, substrate and other materials that are described in this manual only. Detailed operation of the
machine is described in section "Operation".
This machine may be used only within the limits for specifications and tolerances of the order, on the
assembly drawing and indicated in this manual. If the machine is used outside these specifications, Javo BV
can not take responsibility for this machine.
This machine is intended for products as agreed in the order confirmation only. To ensure the proper
operation of this machine, only products with specifications and tolerances as specified in the order may be
used.
Do not use the machine for purposes other than the intended purpose of Javo BV. This can lead to damage
and danger to the operator and its
This machine is CE marked. When placing multiple machines in one line, the entire line must be properly CE
marked before using this machine. Untill proper CE Marking of the line is carried out, commissioning of this
machine is prohibited.
Specifications
Voltage
Machine connection
Power consumption
Measurements (length X width X height)
Weight
Height conveyor
Work direction
Max. speed
Min. speed
Minimum passage height
Maximum passage height
Maximum tray width
Content substrate bin
Drive conveyor
Tray conduction 2 sides
Substrate slide in substrate bin
Year of construction
Type product
1.1 Type plate
The type plate is placed onto the main cabinet door.
Version 2016-2
environment.
400Volt 50Hz 3~+N+ PE (or in consultation)
16A 5pole
1.5 kW
3650 X 1300 X 2500 mm
520kg
840 mm
From left to right
540 m. p/u bij 60Hz
126,5 m. p/u bij 12,5 Hz
190mm
230mm
470mm
770 Litre
Motor on frequency drive (controls on electrical cabinet)
Adjustable in width
Standard
See type plate
As agreed in the order confirmation.
User Manual Javo Traytopper
4
Advertisement
Table of Contents
