Maintenance; Required Tools And Equipment; Preventive Maintenance - Javo Plus User Manual

7 Maintenance

Follow all instructions described in this manual, in particular chapter safety.
Maintenance of this machine must be performed in compliance with warnings on the machine and in
accordance with the user manual by qualified personnel.
Keep hands, hair, loose clothing and / or jewelry away from moving parts of the machine. Wear appropriate
clothing without loose parts. Wear non-slip work shoes.
As long as the machine is on, no connection or safety devices may be removed. The machine may only be
used when all protective devices and safety-related facilities are available and ready for use.
Always unplug the plug from the socket before starting maintenance. Wear personal protective equipment
(see section 2.3).
Inform operating personnel before start maintenance. Interrupt if possible the power (mains), before the
machine is investigated or maintained by turning off the main switch and locking it and pull the plug from
the socket. If work must be done with power supply (mains) voltage on the machine, work with an additional
person who can operate the emergency stop.

7.1 Required tools and equipment

A set of keys is included with the machine, consisting of:
A. Allan key 4 mm
B. Door key
C. Spanner 24-27mm
D. Spanner 17-19mm
E. Spanner 10-13mm

7.2 Preventive Maintenance

For the following maintenance instructions normal use is considered. With heavy use, or use under extreme
conditions, maintenance should be performed at shorter intervals.
Item
Machine
Substrate bin
Elevator and belts
Elevator blades
Materials in the machine
Drill unit
Greaseras
Safety components
Pictograms
Electrical installation
Electric motors
Version 2015-1
1x per... Comments
Day After each daily use, spray with air to prevent pottrack jams etc.
Common places where substrate is: the pottrack, drill, drive of the drill
and the elevator.
Day Clear. See section "Empty substrate bin".
Day Check tension. See section "Mounting, installation and commisioning".
Day Clean. See section "Elevator Blades Cleaning".
Day Remove trays or other material that has fallen into the machine before
starting the machine.
40 hours Lubricate. see section "Lubricate drill unit".
6 months Greaseras greasing: elevator bearing, driveshaft pottrack.
Week Test the safety circuit. See section "Test safety circuit".
Week Check readability and replace if necessary.
Year Check for damage.
Year Remove dust.
User Manual Javo Plus en Plus Extra Potmachine
20