Safety Devices On The Machine; Explanation Of Icons And Symbols - Javo Traytopper User Manual

2.2 Safety devices on the machine

Caps and doors are screening moving parts. Always place back caps and close doors before the machine is
turned on. Caps and doors should remain closed while operating the machine.
The motors of the machine are protected against overload by thermal switches. These switches are located in the
control box.

2.3 Explanation of icons and symbols

Pictogram Meaning
Read and understand this manual before using the machine and / or performing maintenance.
Remove Power (mains).
Wear during all work on or with the machine safety shoes and safety glasses.
Wear during cleaning and maintenance work on this machine also safety gloves and protective
clothing.
Warning.
Important points and / or instructions regarding safety and / or injury prevention are marked with
this warning sign.
Dangerous electrical voltage.
Dangerous electrical voltage present.
Risk of crushing.
Danger of moving or rotating parts.
It is forbidden to wear Loose clothing, long hair and / or jewelry nearby moving parts of the
machine.
Trespassing.
Do not rinse control cabinet
Danger of moisture in the cabinet when it is rinsed with water.
Symbols that may be present on this machine
Drill
Elevator standard
Speed pot belt (curved)
Version 2016-2
Direction of movement
Elevator SE
Speed pot belt (straight)
Speed ground feeder
(curved)
Pot
Brush disc Rotofill
User Manual Javo Traytopper
Speed ground feeder
(straight)
Tray belt Rotofill
Rotor Rotofill
6